SILVER ZEBRA - Heat Transfer Foil

  • Sale
  • Regular price $1.00
Shipping calculated at checkout.

Heat Transfer Foil

12x12 inch sheet 

Product Overview:

★Metallic finish for a fashionable effect on any garment or promotional piece
★Not recommended for use as a base layer in multi-color designs
★REQUIRES an Adhesive Sheet or Plastisol Ink to work properly
★Four different decorating techniques

Notes for Use

★ Recommended Fabrics: Cotton, Polyester, and Poly/cotton blends

Adhesive Instructions

★ Cut design out of Adhesive Sheet (mirror design and cut with dull side (adhesive) up and shiny plastic (carrier sheet) down
★ Weed design
★ Press Adhesive Sheet for 3-5 Seconds with LIGHT pressure
★ Use Temperature of 300 degrees F
★ Peel carrier sheet hot (immediately)

Foil Instructions

★ CAREFULLY place foil over the Adhesive design and make sure it is completely covered
★Place a cover sheet over design
★Press foil for 8-10 seconds with FIRM pressure
★Use Temperature of 300 degrees F
★Wait until completely cool to remove foil

Alternate Design Methods

Matte Finish – A second application will give the foil a less mirror-like, more matte finish. After your initial application, let cool, peel the transfer foil away and place the garment under the heat press again using a cover sheet.

Distressed – Crumple the foil and then heat apply. The result is a custom “crackle” finish that’s still shiny and reflective. The more crumpled you make the foil, the more distressed the look.

Multi-Color Effect – Apply the distressed foil as usual. Once it’s cool, peel back the foil and apply a different color piece of smooth foil to fill in the voids. You can also cut the foil into pieces and layer them on top of the adhesive to make a multi color effect without distressing.

Colors may appear different than actual colors based on screen and monitor settings.

Actual sheets may vary +/- 1/4" in size.

Always perform a test cut. If multiple sheets are purchased, they will come as individual 12x12 sheets.

We are not responsible for issues with equipment, settings, or other errors.

Please visit for additional information about using these materials.